Plastic paint/Paint

Plastic paint/Paint

Shanghai, China
Production capacity:
20000 Kilogram / Month
Shanghai, China
Company
86-021-52277860
Mike Lee
Contact person

Basic Information

Plastic paint/Paint EASICOAT Top Coat--2K Solid Colors Substrates: Dried and sanded existing finishes, EC 1K or 2K Primers Surface Cleaning: Remove wax, silicon and other contaminations with degreaser. Mixing Ratio: <18°C EC-2K Solid Colors 100 parts EC-801Fast Drying Hardener 50 parts M-1 Thinner 5-20 parts 18-24°C EC-2K Solid Colors 100 parts EC-802 Standard Hardener 50 parts M-1 or M-2 Thinner 5-20 parts 25-30°C EC-2K Solid Colors 100 parts EC-802 Standard Hardener 50 parts M-2 or M-3 Thinner 5-20 parts >30°C EC-2K Solid Colors 100 parts EC-803 Slow Drying Hardener 50 parts M-3 Thinner 5-20 parts Pot Life: EC-801 Fast Drying Hardener: 2 hours, 25°C; EC-802 Standard Hardener or EC-803 Slow Drying Hardener: 4hours, 25°C No. of Coats: 2-3 coats, 40-60um Flash-off Time: At 25°C, 5-10 minutes between coats, allow 15-20 minutes flash-off time before baking Spray Gun & Pressure Gravity Feed 1.2-1.5mm 3-5kg/cm2 Siphon Feed 1.4-1.7mm 3-5kg/cm2 Drying Time: Temperature Dust Free Tack Free Dry to Handle Thorough Dry 25°C 40 minutes 1-2 hours 8 hours 7days 70°C 5 minutes 10 minutes 20 minutes 60 minutes Shelf Life: 2 years in original sealed can at cool and dry place at 20°C Packaging: 1L, 3.75L Note: 1. Remains of water in the sanding marks is harmful to the property of paint film. If the substrate is prepared with P800-1000 wet, blow dry the surface with spary gun. 2. At temperature lower than 15°C, air-dry at ambient temperature is not recommended. Allow a full bake at 60°C. 3. At ambient temperature higher than 30°C, add Retarder Solvent into thinner to avoid blushing. Details please refer to the technical data sheet of Retarder Solvent. 4. In the event of fisheyes during application, add 0.5-1% Anti Silicon in the paint remained and re-spray the affected area. 5. In the overspray area of new and existing finish, apply directly Thinner SRA to achieve an invisible transition. Details please refer to the technical data sheet of Thinner SRA. 6. The products mixed with hardener should be used up soon and can not restore for future use. 7. Clean equipments immediately with solvent after application.

Delivery terms and packaging

Packaging Detail: lL Delivery Detail: 20 30days after order confirmation

Payment term

Letter of credit

Telegraphic transfer

Фотографии

    Password recovery
    To recover your password, please enter in the box below your email address with which you have registered:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    An error has occurred. Please check your e-mail address and try again.
    Ваш новый пароль:

    Name is empty


    Выберите страну доставки

    You have not written a message

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    Your message has been sent!

    Close

    1

    Дата события:

    12.10.2016 - 18.10.2016
    Catalog
    Cancel Close
      Show more close
        Area search
        Worldwide
        Категории
          Product